Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Update on OLF #2 Remembering Donors
http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=10419		 Page 1 of 1
Author:  Bruce Dickey [ Tue Jan 16, 2007 10:51 am ]
Post subject: 
I did a little gleaning today from an old post and found a few donors who should'nt be forgotten.

Had some great conversations also with Hank Mauel PM'ing back and forth today. Thanks Hank for your support and encouragement.

Here are the things I think that were left off the list of donors I recently posted:

John Hall, donation of a guitar building mold when we needed one back in January or February of the last orbit around the sun. Thanks John.

Todd Rose, who purchased the used Blues Creek mold when Woolson finished his part. Thanks Todd.

Mike Tobey, who sent shipping monies to the project. Thanks, Mike.

There were a couple of donations offered but maybe not tendered because they were not needed at the time. We could probably use some shipping money soon as this guitar is on the move again. Thanks to all who offered shipping money. If you are still interested, just say so now. Thank you too.

I hope it's okay to continue to post these occasional encouraging updates in the main forum. I'm keeping the Build Forum current with pertinent info though as well.

PROFESSIONAL FINISHER NEEDED FOR THIS PROJECT. This guitar is destined for greatness. However, we do need a professional finish applied before it heads back out to Hank for the Fret JOB. Any of you guys got any suggestions? Thanks, Bruce

PS In case you were wondering, why didn't that mold come to Arkansas with the guitar so I could glue the top? Anyone remember?

(because the Woolson Linings make the rim rigid and the mold is no longer needed)

BLAKE DYSON steps up to finish the OLF #2 Guitar Project. Thanks Blake. We'll get it too you ASAP.




Bruce Dickey39103.7715972222
Author:  Bruce Dickey [ Tue Jan 16, 2007 1:36 pm ]
Post subject: 
OLF #2 Guitar Project

A Gift Guitar for an industry Guitar Guy,
known and revered by many. (Pssst! It's a secret)

Drew and donated the OLF SJ Plans to the OLF. His SJ plans are used for this project; Michael Payne

Donation of Back and Side set, bindings; Bob Cefalu

Bend Sides, attach to tail block; Lance Kragenbrink

Back construction and install neck block, furnish two part linings and install, radius sides and join back to sides; Paul Woolson

Donate SJ Mold, John Hall, Blues Creek

Purchase Mold and send needed Shipping Money, Todd Rose

Send Shipping Money, Mike Tobey

Furnish Abalone Rosette; Dave Rector

Furnish Sitka Top, join top and install rosette,
install Adirondack braces using hhg, radius sides for top and join top to body; Bruce Dickey

Bind and purfling; Brock Poling

Access Stage 5 Drednaught Case donated by George Armstrong for transport while under construction.

Gold Gotoh 510 Tuners donated by George Armstrong

Fretboard blank furnished by Dennis Leahy;

Compound Radius, Slot and Bind fretboard; John Mayes

Furnish a neck blank and shipping, John How

Shape and build Neck, furnish neck blank, join fretboard and fit neck to body: John Watkins

Target Waterborne Finish done by Blake Dyson

K and K Pickup System; Don Atwood

Furnish saddle and nut in bone or ivory; Michael McClain

Ameritage donated a custom case for final use: Ameritage Case Company

Furnish truss rod money and bridge blank money, SlackKeyMike, Mike O'Melia

Final setup, including making the ebony bridge and install, shape and install nut and saddle, fret the neck and fill fret ends, buff out, install clear pickguard, string up, install K and K pickup, break in and ship to Donee; Hank Maeul

Shipping money provided by anonymous OLF member.

Okay Folks, please advise if I missed anything, Bruce

Bruce Dickey39104.619525463
Author:  John How [ Tue Jan 16, 2007 2:12 pm ]
Post subject: 
I threw a neck blank in the box when I shipped it to John Watkins. Don't know if he'll use it for the guitar or for firewood though.
Author:  Bruce Dickey [ Tue Jan 16, 2007 2:17 pm ]
Post subject: 
Thanks John, I'll go back up and add it. You said neck block, when you emailed and that confused me. I knew Woolson had installed a neck block. Now I get it. Neck Blank.
Author:  Bruce Dickey [ Tue Jan 16, 2007 2:26 pm ]
Post subject: 
This is probably the most important hurdle to jump for the OLF #2 Build Project. Suggestions?
Author:  Serge Poirier [ Tue Jan 16, 2007 3:10 pm ]
Post subject: 
Having only 2 under the belt, i feel that i'm not confident enough about my finishing skills, however, i would like to invite someone who knows more about FP than me to come forward and show support to Bruce and this great project. If i could, i certainly would but we need someone who isn't afraid to take that challenge, c'mon guys, let's show some SOLIDARITY for the sake of this caring community.

Serge
Author:  slackkeymike [ Tue Jan 16, 2007 3:39 pm ]
Post subject: 
Hi! Not sure how I can help...if you need $$$ please tell me...be specific too.

Mike
Author:  Bruce Dickey [ Tue Jan 16, 2007 4:52 pm ]
Post subject: 
Mike, John Watkins will be needing to ship the guitar soon, it costs 30 to 40 USD$ I'd guess to ship that guitar to the finisher. We can put your name up there in lights like everyone else who's helped.
Author:  Homeboy [ Wed Jan 17, 2007 4:10 pm ]
Post subject: 
I do waterbased finish. You had earlier asked for a finish person using nitro or French polish. I can do a nice finish, I used to be a finish man for a small guitar company. Let me know if you want a waterbased finish on the guitar and maybe we can work something out.

Homeboy
Author:  slackkeymike [ Wed Jan 17, 2007 4:34 pm ]
Post subject: 
OK!!! Count me in...

Mike
Author:  Serge Poirier [ Wed Jan 17, 2007 11:24 pm ]
Post subject: 
[QUOTE=Homeboy] I do waterbased finish. You had earlier asked for a finish person using nitro or French polish. I can do a nice finish, I used to be a finish man for a small guitar company. Let me know if you want a waterbased finish on the guitar and maybe we can work something out.

Homeboy[/QUOTE]

I don't know 'bout ya Bruce but it looks like we've got ourselves a volunteer here! Thanks Homey, i'll let Bruce give ya more details!

Cheers

Serge
Author:  Bruce Dickey [ Thu Jan 18, 2007 1:19 am ]
Post subject: 
http://www.dysonguitars.com/Bio.htm

Blake, I checked out your website and man was it ever enlightening. You have this guitar building down brother....

I decided just two days ago that if no one stepped up, I would do a Nitro finish myself. Your offer of a waterbased finish is equally as good. So it's a tie.

Of course, since taking up the reins of the project, if I assigned this job to myself now, it would appear biased. So we must find a way to impartially decide the finish on the OLF #2.

Serge, would you take this Morgan Dollar and flip it for us? "Sure". Thanks.

Now, here are the ground rules, Heads, You win, Tails, I lose. Okay Serge go ahead and toss the coin.

Serge, "It's up, and it's Tails, Bruce you lose. Blake is the winner and will do a waterbase finish on OLF #2"

Well, can't win 'em all, congratulations Blake, I know you'll do a great job. I'll call you later, I'm headed out for breakfast.

Thanks a MILLION Blake Dyson, please check out his Bio above, it's nice to make your acquaintance. Your pictures attest to your fine skills in finish. And if that isn't enough, your bio speaks for itself.

Thanks from all of us who have participated in the construction and donations to this point. Expect a phone call later. Let's hear it for Blake!
Author:  Pwoolson [ Thu Jan 18, 2007 2:06 am ]
Post subject: 
Bruce it's a very minor oversight but I did my linings on this at the same time I did everything else. Might add that to the list. Thanks. P
Author:  Serge Poirier [ Thu Jan 18, 2007 2:18 am ]
Post subject: 
Blake, you rock dude, way to go my friend!

Author:  Bruce Dickey [ Thu Jan 18, 2007 3:37 am ]
Post subject: 
Paul, you win the prize.

Earlier I posed the question: Why didn't Woolson send me the mold so I could glue the top on the OLF #2 Guitar. The answer: Your fine two part linings which stiffen the rim so much, you no longer need a mold.

I'll just run up right now and make that addition. This is precisely what I wanted all involved to do, make these corrections. We are having a label which will recognize all these contributions, and it should be correct. Thanks Paul....
Author:  Bruce Dickey [ Thu Jan 18, 2007 4:44 am ]
Post subject: 


Blake, I left my phone number on your answering machine. Thanks for a call back, Bruce
Author:  Bruce Dickey [ Thu Jan 18, 2007 2:32 pm ]
Post subject: 
Slackkey, how would you feel about supplying a two way truss rod over to John Watkins place and an ebony bridge blank over to Hank Mauels.

I talked to John today and the topic never came up, but I know that OLF 2 neck needs a truss rod, about $20, John may have 'em in stock?

Also, Hank offered to make a smiley ebony bridge, one like he makes, if I'd get him a blank? about $7.

Shipping was already covered by previous donations, and those funds are enroute guys.

So, what do you think Slackkey? Bruce
Author:  slackkeymike [ Thu Jan 18, 2007 3:09 pm ]
Post subject: 
pm'd you...what is total?

Mike

(pm me the paypal email)
Author:  Bruce Dickey [ Fri Jan 19, 2007 1:08 am ]
Post subject: 
Mike, check your PM for the paypal addys and thanks for helping out on this project. Let us know your last name so we can include it in the Build Documentation as a donor or you may remain slackkeymike.

John Watkins $20 for a truss rod.

Hank Mauel $10 for a ebony bridge blank.

Thanks Mike, Bruce

Author:  John Watkins [ Fri Jan 19, 2007 2:38 am ]
Post subject: 
I stock the truss rods. No sweat.
Author:  Bruce Dickey [ Fri Jan 19, 2007 3:24 am ]
Post subject: 
Great. Thanks John, good luck with all you are working on. bd
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/